How To Configure Firewall with UFW on Ubuntu 20.04 LTS
ow do I set up and configure firewall with UFW on Ubuntu 20.04 LTS server?
UFW is an acronym for an uncomplicated firewall. Securing a network with an uncomplicated firewall is super easy and highly recommended. This page explains how to set up and secure your Ubuntu 20.04 LTS server with ufw.
| Tutorial requirements | |
|---|---|
| Requirements | Ubuntu Linux 20.04 LTS |
| Root privileges | Yes |
| Difficulty level | Easy |
| Category | Firewall |
| Prerequisites | ufw command |
| Est. reading time | 7 minutes |
|
Table of contents ↓ |
|
- nixCraft is a one-person operation. I create all the content myself, with no help from AI or ML. I keep the content accurate and up-to-date.
- Your privacy is my top priority. I don’t track you, show you ads, or spam you with emails. Just pure content in the true spirit of Linux and FLOSS.
- Fast and clean browsing experience. nixCraft is designed to be fast and easy to use. You won’t have to deal with pop-ups, ads, cookie banners, or other distractions.
- Support independent content creators. nixCraft is a labor of love, and it’s only possible thanks to the support of our readers. If you enjoy the content, please support us on Patreon or share this page on social media or your blog. Every bit helps.
Step 1 – Set Up default UFW policies
To view status of ufw, type:$ sudo ufw status
Sample outputs:
Status: inactive
The default policy firewall works out great for both the servers and desktop. It is always a good policy to closes all ports on the server and open only required ports one by one. Let us block all incoming connection and only allow outgoing connections from the Ubuntu 20.04 LTS box:$ sudo ufw default allow outgoing
$ sudo ufw default deny incoming
Enabling IPv6 support
Make sure the directive IPV6=yes do exists in /etc/default/ufw file. For instance:$ cat /etc/default/ufw
Step 2 – Open SSH TCP port 22 connections
The next logical step is to allow incoming SSH ports. We can easily open SSH TCP port 22 using UFW as follows:$ sudo ufw allow ssh
If you are running ssh on TCP port 2222 or TCP port 2323, enter:$ sudo ufw allow 2222/tcp
$ sudo ufw allow 2323/tcp
Some sysadmins have a static IP address (such as 202.54.2.5) at home or office location. In that case, only allow ssh access from the static IP address such as 202.54.2.5 to Ubuntu server IP address 172.24.13.45:$ sudo ufw allow proto tcp from 202.54.2.5 to 172.24.13.45 port 22
But how do I find out my static IP 202.54.2.5 on Ubuntu server itself? Try the w command or lastlog command:$ w
$ lastlog -u {YOUR_ADMIN_LOGIN_NAME_HERE}
$ lastlog -u vivek
And here is what I see:
Username Port From Latest vivek pts/0 202.54.2.5 Thu Sep 29 15:19:21 +0000 2022
Next, let us limit ssh port, run:$ sudo ufw limit ssh
See “How to limit SSH (TCP port 22) connections with ufw on Ubuntu Linux” for more information.
Step 3 – Turn on firewall
Now we got basic configuration enabled. In other words, the firewall will drop all incoming traffic except for ssh TCP port 22. Let us true it on the UFW, enter:$ sudo ufw enable
Remember, once UFW enabled, it runs across system reboots too. We can verify that easily as follows using the systemctl command:$ sudo systemctl status ufw.service
Want to disable the UFW based firewall? Try
If you need to stop the firewall and disable on system startup, eenter:$ sudo ufw disable
Sample outputs:
Firewall stopped and disabled on system startup
Step 4 – Open specific incoming connections/ports
Let us add more rules. Say you want to open ports and allow IP address with ufw. The syntax is as follows to open TCP port 80 and 443:$ sudo ufw allow 80/tcp comment 'accept Apache'
$ sudo ufw allow 443/tcp comment 'accept HTTPS connections'
Open UDP/1194 (OpenVPN) server:$ sudo ufw allow 1194/udp comment 'OpenVPN server'
Allow port ranges via ufw
We can allow port ranges too say, tcp and udp 3000 to 4000:$ sudo ufw allow 3000:4000/tcp
$ sudo ufw allow 3000:4000/udp
In this example, you want to allow ALL connections from an IP address called 104.22.10.214, enter:$ sudo ufw allow from 104.22.10.214
Let us allow connections from an IP address called 104.22.11.213 to our port 25, enter:$ sudo ufw allow from 104.22.11.213 to any port 25 proto tcp
We can set dest IP 222.222.222.222 for port 25 too:$ sudo ufw allow from 104.22.11.213 to 222.222.222.222 port 25 proto tcp
Allow connection on specific interface
Open port 22 for wg0 interface only:$ sudo ufw allow in on wg0 to any port 22
Say you want to allow connection for TCP port 3306 on lxdbr0 interface from 10.105.28.22, then add:$ sudo ufw allow in on lxdbr0 from 10.105.28.22 to any port 3306 proto tcp
Let us add sub/net instead of single IP address:$ sudo ufw allow in on lxdbr0 from 10.105.28.0/24 to any port 3306 proto tcp
Step 5 – Block and deny incoming connections/ports
Do you want to close ports and block certain IP addresses? The syntax is as follows to deny access. In other words, simply ignoring access to port 25:$ sudo ufw deny 25/tcp
Make sure we deny all connections from an IP address called 203.5.1.43, enter:$ sudo ufw deny from 203.5.1.43
Deny all connections from an IP/subnet called 103.13.42.13/29, enter:$ sudo ufw deny from 103.13.42.13/29
Want to deny access to 1.1.1.2 (say bad guys IP) on port 22? Try:$ sudo ufw deny from 1.1.1.2 to any port 22 proto tcp
Step 6 – Verify status of UFW
Use the status command as follows:$ sudo ufw status
Status: active To Action From -- ------ ---- 22/tcp ALLOW Anywhere 80/tcp ALLOW Anywhere # accept Apache 443/tcp ALLOW Anywhere # accept HTTPS connections 1194/udp ALLOW Anywhere # OpenVPN server 3000:4000/tcp ALLOW Anywhere 3000:4000/udp ALLOW Anywhere Anywhere ALLOW 104.22.10.214 25/tcp ALLOW 104.22.11.213 222.222.222.222 25/tcp ALLOW 104.22.11.213 Anywhere DENY 203.5.1.43 Anywhere DENY 103.13.42.8/29 22/tcp DENY 1.1.1.2 22/tcp (v6) ALLOW Anywhere (v6) 80/tcp (v6) ALLOW Anywhere (v6) # accept Apache 443/tcp (v6) ALLOW Anywhere (v6) # accept HTTPS connections 1194/udp (v6) ALLOW Anywhere (v6) # OpenVPN server 3000:4000/tcp (v6) ALLOW Anywhere (v6) 3000:4000/udp (v6) ALLOW Anywhere (v6)
Want verbose outputs? Try:$ sudo ufw status verbose
Ubuntu 20.04 LTS UFW delete rules
So far we learned how to add, deny, and list the firewall rules. It is time to delete unwanted rules. The syntax is as follows to list all of the current rules in a numbered list format:$ sudo ufw status numbered
Status: active
To Action From
-- ------ ----
[ 1] 22/tcp ALLOW IN Anywhere
[ 2] 80/tcp ALLOW IN Anywhere # accept Apache
[ 3] 443/tcp ALLOW IN Anywhere # accept HTTPS connections
[ 4] 1194/udp ALLOW IN Anywhere # OpenVPN server
[ 5] 3000:4000/tcp ALLOW IN Anywhere
[ 6] 3000:4000/udp ALLOW IN Anywhere
To delete 6th rule type the command:$ sudo ufw delete 6
$ sudo ufw status numbered